Commander 2WD V8-4.7L Flex Fuel (2009)
1. Install the seat risers. See: Service and Repair/Seat Riser - Installation
2. Position the side member assembly (3) onto the length adjuster assembly (5) and install the nuts (6), bolts (1 AND 4) and spacers (2) on the
inboard side.
3. Tighten the bolts to 42 Nm (31 ft. lbs.).
4. Squeeze the towel bar together and insert the ends into the bushings on both tracks.
5. Install the spring clip.
6. Install the seat cushion and install the seat. See: Seat Cover/Service and Repair/Seat Cushion Cover - Installation
Seat Latch - Removal
