Commander 2WD V8-4.7L Flex Fuel (2009)
10. Install the two right side seat back bolts (1).
11. Tighten the right side seat back bolts to 55 Nm (41 ft. lbs.).
12. Secure the seat back cover tab straps to the seat back frame.
13. Install the seat side trim panel covers (1) and fully engage the retainer clips.
14. Rotate seat back down and fully engage the seat latches.
15. Install the seat back trim cover panel (1).
16. Install the second row seat assembly. See: Service and Repair/Seat, Front/Seat - Installation
Front
INSTALLATION
