Commander 2WD V8-4.7L Flex Fuel (2009)
1. Install the cable (2) to the vehicle.
2. Install the 2 push pins for the park brake cable to the stabilizer bar bracket.
3. Install the stabilizer bar bushing clamp bolts.
4. Install the park brake cable (2) into the support plate.
5. Reconnect the park brake cable at the brake actuator lever (2).
6. Reconnect the rear park brake shoes (1)See: Parking Brake Shoe/Service and Repair/Removal and Replacement/Installation.
7. Adjust rear park brake shoes See: Parking Brake Shoe/Adjustments.