Commander 2WD V8-4.7L Flex Fuel (2009)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Vibration Damper - Installation
INSTALLATION
CAUTION: To prevent severe damage to the crankshaft, damper, and damper installer 8512A, thoroughly clean the damper bore and the
crankshaft nose before installing damper.
1. Position the damper onto the crankshaft.
2. Assemble the damper installer 8512A (2) and the A/C hub installer cup 6871 (1).
3. Using the damper installer 8512A (2) and the A/C hub installer cup 6871 (1), press the damper onto the crankshaft.
4. Coat the vibration damper bolt threads with Mopar (R) Nickel Anti-Seize or equivalent, install and tighten the bolt to 175 Nm (130 ft. lbs.).
5. Install the cooling fan assembly See: Cooling System/Radiator Cooling Fan/Service and Repair/Removal and Replacement/Cooling Fan -
Installation
6. Install the radiator upper shroud and tighten fasteners to 11 Nm (95 in. lbs.).
7. Install the radiator upper hose.
8. Install the accessory drive belt See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Serpentine Accessory Drive
Belt - Installation
9. Refill the cooling system See: Cooling System/Service and Repair
10. Connect the negative battery cable.
