Commander 2WD V8-4.7L Flex Fuel (2009)
2. Remove the instrument panel from the vehicle See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Instrument Panel - Removal.
3. Remove the two screws (1) that secure the mode door actuator (2) to the rear of the HVAC air distribution housing (3).
4. Remove the mode door actuator from the air distribution housing and disconnect the HVAC wire harness connector (4) from the actuator.
5. Remove the mode door actuator from the vehicle.
Rear
REMOVAL
1. Remove rear HVAC housing (1) and place it on a workbench .
2. Disconnect the rear HVAC wire harness connector (2) from the rear mode door actuator (3).
3. Remove the two screws (4) that secure the rear mode door actuator to the back of the rear HVAC housing and remove the actuator.
