jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Ambient Temperature Sensor / Switch HVAC > < Air Outlet - Removal|Page 6131
Page 2
background image

NOTE: Make sure that the air outlets are properly aligned to the rear upper air duct opening.

2. Position the upper rear air outlet bezel (1) to the quarter interior trim panel (3) and engage the lower bezel retainer clips to the trim panel.
3. Roll the top of the upper rear air outlet bezel upward and gently push the top of the bezel into the quarter interior trim panel until the upper bezel

retainer clips (2) fully engage the slots in the trim panel.

Ambient Temperature Sensor / Switch HVAC > < Air Outlet - Removal|Page 6131