Commander 2WD V8-4.7L Flex Fuel (2009)
NOTE: If the seal on any air door is deformed or damaged, the air door must be replaced.
19. Remove the upper defrost/panel-air door (1), lower defrost/panel-air door (2), directional vane (3), rear outlet-air door (4) and the blend-air door
(5) from the right side air distribution housing (6) as required.
NOTE: If the seal on any air door is deformed or damaged, the air door must be replaced.
20. Remove the upper defrost/panel-air door (1), lower defrost/panel-air door (2), directional vane (3) and the blend-air door (4) from the left side air
distribution housing (5) as required.
Front Air Inlet Housing
HOUSING-AIR INLET
NOTE: The air inlet housing must be removed from HVAC housing and disassembled for service of the recirculation-air door.
