Commander 2WD V8-4.7L Flex Fuel (2009)
1. Reach under and behind the rear bumper fascia (4) to access either of the two rear fog lamp sockets (3).
2. Align the base of the bulb (2) with the socket.
3. Push the bulb straight into the socket until the base is firmly seated.
4. Align the socket and bulb with the keyed opening on the bottom of the rear fog lamp housing (1).
5. Insert the socket and bulb into the housing until the socket is firmly seated.
6. Rotate the socket clockwise about 30 degrees to lock it into place.
7. Reconnect the battery negative cable.
