Commander 2WD V8-4.7L Flex Fuel (2009)
Horn Switch: Service and Repair
Horn Switch - Removal
REMOVAL
WARNING: On vehicles equipped with airbags, refer to electrical, restraints before attempting any steering wheel, steering column, or
instrument panel component diagnosis or service. Failure to take the proper precautions could result in accidental airbag
deployment and possible serious or fatal injury.
1. Disconnect and isolate the battery negative cable.
2. Remove the trim cover from the driver side airbag. See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Driver Air Bag - Removal
.
3. Remove the horn switch (2) and tray (6) as a unit from the pouch on the retaining strap of the driver side airbag (5).
