Commander 2WD V8-4.7L Flex Fuel (2009)
Trailer Lighting Module: Service and Repair
Trailer Tow Module - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Fold and tumble the right outboard second row seat assembly forward.
3. Remove the carpeted cover panel from over the cavity on the right outboard end of the intermediate step assembly (4).
4. Disconnect the four body wire harness connectors from the connector receptacles (2) on the back of the Trailer Module (TM) (3).
5. Remove the two nuts (6) that secure the TM to the studs on the mounting plate (5) on the floor of the step cavity.
6. Remove the module from the mounting plate.
