Commander 2WD V8-4.7L Flex Fuel (2009)
20. Install both battery positive cable eyelet terminals onto the B(+) terminal studs in the Power Distribution Center (PDC) and Integrated Power
Module (IPM).
21. Install and tighten the nuts that secure the battery positive cable eyelet terminals onto the B(+) terminal studs in the PDC and IPM. Tighten the nut
to 11.5 Nm (105 in. lbs.).
22. Close and latch the covers on the PDC (1) and IPM (2).
23. Install and tighten the screw (1) that secures the battery negative cable eyelet terminal (2) to the inner fender (3). Tighten the screw to 28 Nm (20.5
ft. lbs.).