Commander 2WD V8-4.7L Flex Fuel (2009)
Steering Wheel: Service and Repair
Removal
REMOVAL
1. Disable and remove the drivers side airbag.See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Driver Air Bag - Removal.
2. Disconnect all the electrical connectors.
3. Remove the steering wheel bolt (2).
4. Remove the horn plate then partially reinstall the steering wheel bolt (2).
5. Remove the horn switch (1) to gain access to the holes for the steering wheel removal.
6. Move the horn switch (2) off to the side.
7. Install Gear Puller L-4407A (4) with OTC(R) 7929A jaws (3) or equivalent using the top of the bolt (3) to push on.
NOTE: Ensure the arms for the puller have a good grip into the holes (3) for the steering wheel.
8. Remove the steering wheel.
