Commander 2WD V8-4.7L Flex Fuel (2009)
5. Remove the o-ring (2) and discard then remove disc brake rotor (1). See: Brakes and Traction Control/Disc Brake System/Brake
Rotor/Disc/Service and Repair/Removal and Replacement/Brake Rotor - Removal.
6. Remove the wheel speed sensor bolt (2) and disconnect the wire from the retaining clips from the knuckle See: Brakes and Traction
Control/Antilock Brakes / Traction Control Systems/Wheel Speed Sensor/Service and Repair/Wheel Speed Sensor - Removal/Front.
7. Remove the axle shaft nut. (if equipped with four wheel drive)
8. Remove the hub/bearing (3). See: Wheel Bearing/Service and Repair/Front Hub and Bearing - Removal.
