Commander 2WD V8-4.7L Flex Fuel (2009)
Suspension Spring ( Coil / Leaf ): Service and Repair
Front Coil Spring - Removal
REMOVAL
1. Remove the shock See: Suspension Strut / Shock Absorber/Service and Repair/Front Strut / Shock/Shock Absorber/Removal.
2. Install the shock assembly in the Branick 7200(R) spring removal/installation tool or equivalent (1).
3. Compress the spring (2).
4. Remove the upper shock nut (2).
NOTE: The nub (1) in the upper shock mount (3) must be 180° from the centerline of the lower bracket (9) on the shock (8) for proper
installation.
5. Remove the shock (8).
6. Remove the shock upper mount (3).
7. Remove and inspect the upper (5) and lower (7) spring isolators.
