Commander 2WD V8-4.7L Flex Fuel (2009)
bushing in and out.
NOTE: Extreme pressure lubrication must be used on the threaded portions of the tool. This will increase the longevity of the tool and insure
proper operation during the removal and installation process.
1. Install the new clevis bracket bushing (3) into the lower control arm (5) using tools C-4212F (Press) (1), 9653-3 (driver) (2), 9653-4 (Depth
gauge) (4) the depth gauge will automatically set the depth of the bushing (3) in the control arm (5).
2. Install the clevis bracket (3) to the shock (1) See: Clevis Bracket/Installation.
Left
LEFT FRONT
1. Remove the air box cover and air intake hose.
2. Remove the 3 PDC bracket nuts (1).