Commander 2WD V8-4.7L VIN P Flex Fuel (2007)
Hood Latch Release Cable: Service and Repair
Installation
INSTALLATION
1. Route the hood release cable through the cowl panel (1) and install the grommet (2).
2. Position the hood release handle (4) onto the cowl trim panel.
3. Install the two screws (3) that secure the hood release handle (4) to the cowl trim panel.
4. Route the hood release cable (2) along the left inner fender and the upper radiator crossmember and install the three hood release cable retainers
(1).
5. Install the hood latch (4).
