Commander 2WD V8-4.7L VIN P Flex Fuel (2007)
Compressor Clutch Relay: Service and Repair
Removal
REMOVAL
NOTE: LHD gasoline model shown. Diesel and RHD models similar.
1. Disconnect and isolate the negative battery cable.
2. Open the cover of the power distribution center (PDC) (1) located in the engine compartment.
NOTE: Refer to the fuse and relay layout map on the inside of the PDC cover for A/C clutch relay location.
3. Remove the A/C clutch relay (2) from the PDC.
