Commander 2WD V8-4.7L VIN P Flex Fuel (2007)
Drive/Propeller Shaft: Service and Repair
Removal
REMOVAL
NOTE: The propeller shaft slip joint boot can be replaced. Place reference marks on both sections of the shaft to ensure proper assemble.
1. With vehicle in neutral, position vehicle on hoist.
2. Mark propeller shaft (1) pinion flange (2) and transmission/transfer case flanges for installation reference.
3. Remove propeller shaft (1) from axle pinion flange (2).
4. Remove propeller shaft (1) from vehicle transfer case flange (2) or transmission flange (3).
