Commander 2WD V8-4.7L VIN P Flex Fuel (2007)
NOTE: LHD model shown. RHD model similar.
1. Remove the air inlet housing (1) from the HVAC housing and place it on a workbench.
2. Remove the two screws (2) that secure the recirculation door actuator (3) to the air inlet housing and remove the actuator.
NOTE: If the foam seal on the recirculation-air door or the air inlet housing is deformed or damaged, it must be replaced.
3. Carefully remove the recirculation-air door (4) from the air inlet housing.
Front HVAC Housing
HOUSING-HVAC ASSEMBLY
NOTE: The HVAC housing must be removed from the vehicle and disassembled for service of the A/C evaporator.
1. Remove the HVAC housing assembly and place it on a workbench.
2. Remove the air distribution housing (3) from the HVAC housing (1).
3. Remove the air inlet housing (2) from the HVAC housing.
