jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

SKREEM Programming|Page 4217 > < SKREEM Programming
Page 2
background image

-

PROGRAMMING NOT ATTEMPTED - The scan tool attempts to read the programmed key status and there are no keys programmed into
SKREEM memory.

-

PROGRAMMING KEY FAILED (POSSIBLE USED KEY FROM WRONG VEHICLE) - SKREEM is unable to program an ignition key
transponder due to one of the following:

-

The ignition key transponder is ineffective.

-

The ignition key transponder is or has been already programmed to another vehicle.

-

8 KEYS ALREADY LEARNED, PROGRAMMING NOT DONE - The SKREEM transponder ID memory is full.

-

LEARNED KEY IN IGNITION - The ID for the ignition key transponder currently in the ignition lock cylinder is already programmed into
SKREEM memory.

SKREEM Programming|Page 4217 > < SKREEM Programming