Commander 2WD V8-4.7L VIN P Flex Fuel (2007)
Electronic Brake Control Module: Service and Repair
Installation
INSTALLATION
NOTE: If the ABM is being replaced with a new ABM is must be reprogrammed with the use of a scan tool.
1. Install new seals between the ABM and HCU.
2. Install the ABM (1) to the HCU (2).
3. Install the 3 ABM (1) mounting bolts to the HCU (2) if removed tighten mounting bolts to 12 Nm (9 ft. lbs.).
