Commander 2WD V8-4.7L VIN P Flex Fuel (2007)
NOTE: The metal grommet (1) is used as an assembly aid during the production process and does not require replacement following service removal or
replacement of the third row seat belt buckles.
1. Position the third row seat assembly into the vehicle as a unit.
2. Position the third row buckles (3) and anchor plate (4) to the third row seat support bracket (5). Be certain that the anti-rotation notch on the
anchor plate is engaged with the tab (2) on the seat support bracket.
3. Reinstall the hardware that secures the third row seat assembly and the buckle anchor plate to the vehicle.
