Commander 2WD V8-4.7L VIN P Flex Fuel (2007)
Steering Wheel: Service and Repair
Installation
INSTALLATION
1. Install steering wheel (5) to the column
NOTE: Do not reuse the old steering wheel bolt (3) (a new bolt must be used)
NOTE: Be certain that the steering wheel mounting bolt is tightened to the proper torque specification to ensure proper clockspring
operation.
2. Install the new steering wheel bolt (3). Tighten the bolt to 61 Nm (45 ft. lbs.).
3. Reconnect all the electrical connectors (2, 6 & 7).
4. Install the drivers side air bag (1).