Commander 2WD V8-4.7L VIN P Flex Fuel (2007)
3. Position the lower suspension arm (3) in the axle bracket.
4. Install the axle bracket bolt (1) and nut (2) Tighten to 210 Nm (155 ft. lbs.).
5. Remove the supports and lower the vehicle.
Left Side
LEFT SIDE
1. Raise and support the vehicle.
2. Support the rear axle.
3. Lower the fuel tank in order to gain access to the bolt.
4. Remove the upper suspension arm nut (2) and bolt (3) from the axle bracket.
5. Remove the nut (1) and bolt (7) from the frame rail and remove the upper suspension arm (2).
Right Side
RIGHT SIDE
1. Raise and support the vehicle.
2. Support the rear axle.
