Commander 2WD V8-4.7L VIN P Flex Fuel (2007)
Rear Door Window Glass: Service and Repair
Installation
INSTALLATION
1. Carefully lower the door glass into the rear door through the window opening.
2. Rotate the door glass into position and engage it to the window regulator glass clamps.
3. Using the regulator (2), move the rear door glass to full up.
4. Tighten the bolts in each of the window regulator glass clamps to 12 Nm (105 in. lbs.).
5. Install the glass run channel.
6. Install the watershield onto the inside of the rear door.
7. Position and seat the inner belt molding fully.
