Commander 2WD V8-4.7L VIN P Flex Fuel (2007)
Windshield Washer Spray Nozzle: Service and Repair
Installation
Front
FRONT
1. Position the front washer nozzle (1 or 2) to the mounting hole on the outside of the hood panel (3).
2. Align the anti-rotation tab of the nozzle with the anti-rotation notch in the mounting hole.
3. Using hand pressure, push firmly and evenly on the top of the nozzle until the integral latches lock into place on the underside of the hood.
4. From the underside of the hood, reconnect the washer hose (1) to the barbed nipple of the nozzle (2 or 3).
5. Reinstall the push-in retainers that secure the hood silencer pad to the inner hood reinforcement (4).
Rear
REAR
