Commander 2WD V8-5.7L (2008)
5. Remove the rear passenger door sill scuff plate, See: Scuff Plate/Service and Repair/Sill Cover-Interior/Removal.
6. Remove the upper B-pillar trim panel, See: Pillar Trim/B-Pillar Trim.
7. Open the access door on the lower B-pillar trim panel.
8. Using a trim stick C-4755 or equivalent, disengage the retaining tabs that secure the lower B-pillar trim panel to the B-pillar.
9. Remove the seat belt from the lower B-pillar trim panel through the access door opening and remove the trim panel.
Installation
INSTALLATION
1. Route the seat belt through the access door opening in the lower B-pillar trim panel.
2. Position the lower B-pillar trim panel to the B-pillar and engage the retaining tabs that secure the trim panel to the B-pillar.