Commander 2WD V8-5.7L (2008)
7. Using a magnetic screwdriver or equivalent, remove the upper screw and pull the upper part of the trim panel away from the pillar and release the
bottom tabs.
8. Remove the seat belt (3) from the upper C-pillar trim panel (1) through the slot provided and remove the upper C-pillar trim panel.
C-Pillar Trim Panel-Installation
INSTALLATION
1. Route the seat belt (3) through the slot in the upper C-pillar trim panel (1).
2. Position the locating tabs on the bottom of the upper C-pillar trim panel into the slots in the top of the quarter trim panel (2).
3. Rotate the top part of the trim panel into position and install the screw.
CAUTION: The upper trim plug must be removed and discarded to gain access to the upper retaining screw before attempting to remove the
trim panel. Failure to remove the trim screw may result in damage to the trim panel or the retaining clip.
