Commander 2WD V8-5.7L (2008)
Seat Back: Service and Repair
Seat Back Cushion / Cover - Installation
INSTALLATION
1. Before proceeding with the following repair procedure, review all warnings and cautions. See: Service Precautions
2. Position the seat back cover over the seat back frame.
3. Position the seat back cushion on the frame and position the cover over the cushion.
4. Attach the seat cover (3) to the seat back cushion (1) and install new hog rings.
5. Connect the j-straps (1 & 2).
6. Position the headrest sleeves (2) and seat into the seat back (1) frame fully.
