Commander 2WD V8-5.7L (2008)
Brake Shoe: Service and Repair
Brake Shoes - Removal
REMOVAL
1. Raise vehicle.
2. Remove rear wheel and tire assembly.
3. Remove the 2 caliper bolts (4) then remove the caliper. Support the caliper, Do not let the caliper hang by the brake hose.
4. Remove rubber access plug (1) from back of rear disc brake support plate (3).
5. If necessary retract parking brake shoes with brake adjuster tool (2). Position tool at top of star wheel and rotate wheel.
6. Remove rotor from axle hub flange.
