Commander 2WD V8-5.7L (2008)
Brake Hose/Line: Removal and Replacement
Removal
REMOVAL
1. Install a brake pedal prop rod.
2. Siphon the master cylinder reservoir.
3. Remove the Primary or Secondary brake tubes at the master cylinder.
4. Remove the Primary or Secondary brake tubes at the HCU.
Installation
INSTALLATION
1. Install the primary or secondary brake tubes to the master cylinder.
2. Install the primary or secondary brake tubes to the HCU.
3. Remove the brake pedal prop rod.
4. Fill and bleed the brake system.
