Commander 2WD V8-5.7L (2008)
Camshaft: Removal and Replacement
Camshaft - Removal
CAMSHAFT
1. Remove the battery negative cable.
2. Remove the air cleaner assembly.
3. Drain coolant See: Cooling System/Service and Repair.
4. Remove the accessory drive beltSee: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Accessory Drive Belt -
Removal.
5. Remove the generator.
6. Remove the A/C compressor, and set aside.
7. Remove the radiator See: Cooling System/Radiator/Service and Repair/Removal and Replacement/Radiator - Removal.
8. Remove intake manifold See: Intake Manifold/Service and Repair/Removal and Replacement/Intake Manifold - Removal.
9. Remove cylinder head coversSee: Cylinder Head Assembly/Valve Cover/Service and Repair/Cylinder Head Cover - Removal.