Commander 2WD V8-5.7L (2008)
16. Install the A/C compressor (2).
17. Install the generator (2).
18. Install the accessory drive belt See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Accessory Drive Belt -
Installation.
19. Install the radiator See: Cooling System/Radiator/Service and Repair/Removal and Replacement/Radiator - Installation.
20. Install the air cleaner assembly.
21. Install the battery negative cable.
22. Refill coolant See: Cooling System/Service and Repair.
23. Refill engine oil.
24. Start engine and check for leaks.
Camshaft Core Hole Plug - Removal
REMOVAL - CAMSHAFT CORE HOLE PLUG
CAUTION: Do not damage the rear surface of the camshaft or the core plug sealing surface, when removing the core plug.
1. Remove the rear cam bearing core plug.
Camshaft Core Hole Plug - Installation
