Commander 2WD V8-5.7L (2008)
9. Install engine support fixture special tool # 8534 (1). Do not use the third leg.
10. Raise engine using special tool # 8534 to provide clearance to remove oil pan.
11. Raise the vehicle.
12. Remove the front axle. .
13. Remove the structural dust cover (1). See: Service and Repair/Removal and Replacement/Structural Dust Cover - Removal.
NOTE: Do not pry on oil pan or oil pan gasket. Gasket is integral to engine windage tray and does not come out with oil pan.
