Commander 2WD V8-5.7L (2008)
1. Remove the interior quarter trim panel from the side of the vehicle being serviced See: Body and Frame/Interior Moulding / Trim/Trim
Panel/Service and Repair/Quarter Panel Trim/Quarter Trim Panel - Removal.
2. Disengage the retainer (2) or remove the screws that secure the upper distribution duct (1) to the rear HVAC housing (3) or the left interior quarter
trim panel, depending on the duct being serviced.
3. Disconnect the upper distribution duct from the rear HVAC housing or left upper air outlet, depending on application and remove the duct from
the vehicle.
LOWER DISTRIBUTION DUCT
4. Remove rear HVAC housing (1) and place it on a workbench .
5. Remove the screw (3) that secures the lower distribution duct (2) to the rear HVAC housing.
6. Disconnect the lower distribution duct from the rear HVAC housing and remove the duct.
Rear Distribution Ducts - Installation
INSTALLATION
UPPER DISTRIBUTION DUCT
NOTE: Right side upper distribution duct shown in illustration. Left side duct similar.
