Commander 2WD V8-5.7L (2008)
from the seat belt switch and the ignition switch indicate that the driver side front seat belt is not fastened with the ignition switch in the ON
position. The chime warning system also supports the enhanced seat belt reminder (beltminder) when this feature is enabled. See: Seat Belt
Reminder Lamp/Description and Operation/Operation.
-
Four-Wheel Drive System In NEUTRAL Warning - On vehicles equipped with a Quadra-Trac II(R) transfer case, the EMIC transducer will
generate one short chime each time the 4WD SYSTEM IN NEUTRAL textual message is displayed in the reconfigurable display of the
instrument cluster. This warning confirms that a NEUTRAL shift request for the electronically controlled transfer case has been successfully
completed.
-
Gate Ajar Warning - The EMIC transducer will generate one short chime when a LIFTGATE OPEN textual message and icon are displayed in
the reconfigurable display of the instrument cluster. This warning indicates that the liftgate is not closed or completely latched while the vehicle is
moving.
-
Glass Ajar Warning - The EMIC transducer will generate one short chime when a LIFTGLASS OPEN textual message and icon are displayed
in the reconfigurable display of the instrument cluster. This warning indicates that the liftgate flip-up glass is not closed or completely latched
while the vehicle is moving.
-
Head/Park Lamps-ON Warning - The EMIC transducer will generate repetitive chimes at a fast rate to indicate that hard wired inputs from the
headlamp switch and the ignition switch indicate that the exterior lamps are turned ON with the ignition switch in the OFF position, and either a
hard wired input or an electronic message is received over the CAN data bus indicating that the driver side front door is open. The chimes will
continue to sound until the exterior lamps are turned OFF, the driver side front door is closed, or the ignition switch is turned to the ON position,
whichever occurs first.
-
Hood Ajar Warning - On vehicles sold in a market where a hood ajar switch is required equipment, the EMIC transducer will generate one short
chime each time a HOOD OPEN textual message and icon are displayed in the reconfigurable display of the instrument cluster. This warning
indicates that the hood is not closed or completely latched while the vehicle is moving.
-
Ignition-Off Draw (IOD) Fuse Out Warning - The EMIC transducer will generate one short chime each time the ignition switch is in the ON or
START positions and an IOD FUSE OUT textual message is displayed in the reconfigurable display of the instrument cluster. This warning
indicates that the IOD fuse is missing or ineffective.
-
Key-In-Ignition Warning - The EMIC transducer will generate repetitive chimes at a fast rate to indicate that hard wired inputs from the key-in
ignition switch and the ignition switch indicate that the key is in the ignition lock cylinder with the ignition switch in the OFF position, and either a
hard wired input or an electronic message is received over the CAN data bus indicating that the driver side front door is open. The chimes will
continue to sound until the key is removed from the ignition lock cylinder, the driver side front door is closed, or the ignition switch is turned to
the ON position, whichever occurs first.
-
Low Brake Fluid Warning - The EMIC transducer will generate one short chime when a LOW BRAKE FLUID LEVEL textual message is
displayed in the reconfigurable display of the instrument cluster. This warning indicates that the monitored fluid level in the brake master cylinder
is low.
-
Low Coolant Warning - The EMIC transducer will generate one short chime when the COOLANT LOW textual message and icon are
displayed in the reconfigurable display of the instrument cluster. This warning indicates that the monitored engine coolant level in the coolant
reserve bottle is low. This chime will only occur once during any ignition cycle.
-
Low Fuel Warning - The EMIC transducer will generate one short chime when the FUEL LOW textual message and icon are displayed in the
reconfigurable display of the instrument cluster. This warning indicates that the monitored fuel level in the fuel tank is low. This chime will only
occur once during any ignition cycle.
-
Low Oil Pressure Indicator Warning - The EMIC transducer will generate one short chime when the low oil pressure indicator is illuminated
and the engine speed is greater than 300 revolutions per minute. This warning indicates that the monitored engine oil pressure is low.
-
Low Wash Warning - The EMIC transducer will generate one short chime when the WASHER FLUID LOW textual message and icon are
displayed in the reconfigurable display of the instrument cluster. This warning indicates that the monitored washer fluid level in the washer
reservoir is low.
-
Memory System Warning - On vehicles equipped with the optional memory system, the EMIC transducer will generate one short chime each
time a memory recall request is received and a MEMORY SYSTEM DISABLED - SEATBELT FASTENED textual message and icon, or a
MEMORY SYSTEM DISABLED - VEHICLE NOT IN PARK textual message is displayed in the reconfigurable display of the instrument
cluster. A single short chime will also be sounded each time a memory recall request is received while the memory system is inhibited due to a
vehicle speed input that is greater than zero.
-
Overspeed Warning - The EMIC transducer will generate repetitive chimes at a slow rate when the WARNING! LIMIT SPEED textual
message is displayed in the reconfigurable display of the instrument cluster. This warning indicates that the vehicle speed is over a
pre-programmed speed value. This feature is only enabled on vehicles that have been configured for sale in a Middle East Gulf Coast Country
(GCC).
-
Park Assist System Warning - On vehicles equipped with the optional park assist system, the EMIC transducer will generate one short chime
when the PARK ASSIST DISABLED textual message is displayed in the reconfigurable display of the instrument cluster. This warning indicates
that the park assist system has been manually disabled using the park assist switch. On vehicles with only the rear park assist system this chime
warning will only occur as the gear selector lever is being moved from any position except REVERSE or NEUTRAL into REVERSE or
NEUTRAL. On vehicles with the front and rear park assist systems this warning will only occur as the gear selector lever is being moved from the
PARK position into the REVERSE position.
-
Park Brake Reminder - The EMIC transducer will generate one short chime when the brake/park brake indicator is illuminated to announce that
the park brake is applied or not fully released and the vehicle is moving. This chime will only occur once during any ignition cycle.
-
Perform Service Reminder - On vehicles equipped with a diesel engine, the EMIC transducer will generate one short chime when the
PERFORM SERVICE textual message is displayed in the reconfigurable display of the instrument cluster. This reminder occurs when the
service distance is at or below zero (miles or kilometers), and will repeat at each subsequent ignition cycle until the service distance is reset,
increased or until the service reminder function is disabled. This chime will only occur once during any ignition cycle.
-
Power Liftgate Indicator Warning - On vehicles equipped with an optional power-operated liftgate, the EMIC transducer will generate one
short chime when a UNLOCK TO OPERATE, PUT IN PARK TO OPERATE, FUNCTION DISABLED, CLOSE LIFTGLASS,
