Commander 2WD V8-5.7L (2008)
4. Install the fluid cooler quick connect line (1) to the fluid cooler (3).
5. Install the radiator core support (1).
6. Raise and support the vehicle.
7. Reconnect the rubber hose 1) to the fluid cooler line (3) and reinstall clamp (2) to secure the line in place at the radiator.
8. Lower the vehicle.
9. Refill the power steering fluid and bleed the system See: Steering and Suspension/Steering/Power Steering/Power Steering Bleeding/Service and
Repair.
10. Start engine and check for leaks.
11. Install the grille and the 6 grille push pins (1).
12. Install the hood weather-strip seal (2) at the radiator cowl.
Hose From Cooler To Reservoir
