Commander 2WD V8-5.7L (2008)
HOSE FROM COOLER TO RESERVOIR
1. Install the fluid cooler hose (3) and spring clamp (4) to the reservoir (5).
2. Reinstall the reservoir (5) into the mounting slot.
3. Install the fluid cooler hose (3) and spring clamp (2) to the fluid cooler (1).
4. Refill the power steering fluid and bleed the system See: Steering and Suspension/Steering/Power Steering/Power Steering Bleeding/Service and
Repair.
5. Start engine and check for leaks.
6. Install the grille and the 6 grille push pins (1).
7. Install the hood weather-strip seal (2) at the radiator cowl.
Return Hose From Gear To The HEC Tube
RETURN HOSE FROM GEAR TO THE HEC TUBE
