Commander 2WD V8-5.7L (2008)
Wheel Fastener: Service and Repair
Studs - Removal
Front Wheel Stud
FRONT WHEEL STUD
CAUTION: Do not use a hammer to remove wheel studs.
1. Raise and support vehicle.
2. Remove wheel and tire assembly.
3. Remove brake caliper, caliper adapter and rotor,See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and
Repair/Removal and Replacement/Brake Rotor - Removal.
4. Remove stud (2) from hub with Remover C-4150-A (1).
Rear Wheel Stud
REAR WHEEL STUD
CAUTION: Do not use a hammer to remove wheel studs.
1. Raise and support vehicle.
2. Remove wheel and tire assembly.
3. Remove brake caliper and rotor,See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and
Replacement/Brake Rotor - Removal.
4. Remove stud (2) from hub with Remover 8677 (1).