Commander 2WD V8-5.7L (2008)
HOSE FROM COOLER TO RESERVOIR
1. Drain the power steering fluid out of the reservoir.
2. Remove the hood weather-strip seal (2) at the radiator cowl.
3. Remove the 6 grille push pins (1).
4. Remove the spring clamp (2) from the fluid cooler (1).
5. Unseat the reservoir (5) by lifting up, Remove the fluid cooler hose spring clamp (4) to the reservoir (5).
6. Remove the fluid cooler hose (3) from the vehicle.
Return Hose From Gear To The HEC Tube
RETURN HOSE FROM GEAR TO THE HEC TUBE