Commander 2WD V8-5.7L (2008)
5. Install the inner fender well (2).
6. Install the tire and wheel.
7. Remove the supports and lower the vehicle.
8. Perform a wheel alignment See: Alignment/Service and Repair.
Front Lower Control Arm - Removal
REMOVAL
1. Raise and support the vehicle.
2. Remove the tire and wheel assembly.
3. Remove the steering knuckle (3). See: Front Steering Knuckle/Service and Repair/Front Steering Knuckle - Removal.
4. Remove the shock clevis bracket (3) from the lower control arm.
5. Remove the stabilizer link (2) at the lower control arm.