Commander 2WD V8-5.7L VIN 2 (2006)
NOTE: Do not remove the hoses from the power steering pump.
16. Remove power steering pump and set aside.
17. Remove the dipstick support bolt.
18. Drain the engine oil.
19. Remove the oil pan and pick up tube.
NOTE: It is not necessary to remove water pump for timing cover removal.
20. Remove timing cover bolts and remove cover.
21. Verify that timing cover slide bushings (1) are located in timing cover.
INSTALLATION
1. Clean timing chain cover and block surface.
NOTE: Always install a new gasket on timing cover.
2. Verify that the slide bushings (1) are installed in timing cover.
