Commander 2WD V8-5.7L VIN 2 (2006)
6. Remove the radiator, A/C assembly mounting bolts.
7. Move the radiator, A/C assembly toward the front of the vehicle to gain access in order to remove the line.
8. Raise and support the vehicle.
9. Remove the clamp (2) to the fluid line (3) at the radiator.
10. Remove the line (1) from the front of the vehicle by rotating the line in order to clear components.
INSTALLATION
1. Install the line (1) into place from the front of the vehicle by rotating the line in order to clear components.
2. Move the radiator, A/C assembly back in place.
