Commander 2WD V8-5.7L VIN 2 (2006)
13. Remove the lower clevis bolts.
INSTALLATION
1. Install the sway bar onto the engine cradle as necessary.
2. Install the lower control arms as necessary.
3. Raise the engine cradle into position guiding the engine mount bolts into the engine cradle slots.
4. Install the four engine cradle bolts (1 & 2).
5. Align the engine cradle to the marks made during removal and tighten the front bolts (1) to 203 N.m (150 ft.lbs).
6. Tighten the rear bolts (2) to 122 N.m (90 ft.lbs).