Jeep Workshop Service and Repair Manuals > Commander 2WD V8-5.7L VIN 2 (2006) > Transmission and Drivetrain | Drive Axles, Bearings and Joints | Seals and Gaskets, Drive Axles | System Information | Service and Repair | Rear Axle - C213R

Page 3

4. Push axle into axle tube.
5. Install axle (2) flange nuts (1) and tighten to 119 Nm (88 ft. lbs.).

6. Install speed sensors (2) in axle tube (1) flange.
7. Install calipers and rotors.

Jeep Workshop Service and Repair Manuals