Commander 4WD V6-3.7L VIN K (2007)
Parking Assist Switch: Description and Operation
Description
DESCRIPTION
The park assist switch (2) is integral to the lower switch pod (1) in the instrument panel center stack below the heater and air conditioner controls. This
switch is a normally open, momentary contact type unit that is actuated by depressing the appropriate rectangular molded black plastic push button on the
face of the switch pod. The park assist switch push button is clearly identified with a white International Control and Display Symbol graphic for
Parking Aid and the text OFF. An amber Light Emitting Diode (LED) unit is illuminated behind a small clear plastic jewel-like lens in the push button
to give a visual indication whenever the park assist system has been manually disabled with the ignition switch in the ON or START positions.
The park assist switch cannot be adjusted or repaired and, is serviced only as a unit with the lower instrument panel switch pod. If the switch is
ineffective or damaged, the entire switch pod must be replaced as a unit.
