Commander 4WD V6-3.7L VIN K (2007)
Trailer Connector: Service and Repair
Installation
INSTALLATION
1. Position the 7-way trailer tow connector (2) into the connector bracket on the left of the trailer hitch receiver (1).
2. Install and tighten the four screws (3) that secure the 7-way trailer tow connector to the bracket. Tighten the screws to 4 Nm (35 in. lbs.).
3. Reach behind the bracket to access and reconnect the connector (4) of the underbody wire harness to the 7-way trailer tow connector.
4. Reconnect the battery negative cable.
