jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

ABOUT US
Pedal Positioning Switch|Removal|Page 12248 > < Pedal Positioning Switch|Description and Operation

Commander 4WD V6-3.7L VIN K (2007)

Page 1
background image

Pedal Positioning Switch: Service and Repair
Removal

REMOVAL

1.   Disconnect and isolate the battery negative cable.
2.   Remove the instrument panel center bezel.
3.   Remove the lower instrument panel switch pod fasteners. 
4.   Remove the lower instrument panel switch pod from the vehicle.

Pedal Positioning Switch|Removal|Page 12248 > < Pedal Positioning Switch|Description and Operation