Commander 4WD V6-3.7L VIN K (2007)
Engine Oil: Fluid Type Specifications
ENGINE OIL SELECTION
Engine Oil ........................................................................................................................................................................................................... SAE 5W-20
For best performance and maximum protection for all engines under all types of operating conditions, the manufacturer recommends engine oils that are
API Certified and meet the requirements of DaimlerChrysler Material Standard MS-6395. Use Mopar or an equivalent oil meeting the specification
MS-6395. American Petroleum Institute (API) Engine Oil Identification Symbol This symbol means that the oil has been certified by the American
Petroleum Institute (API). The manufacturer only recommends API Certified engine oils that meet the requirements of DaimlerChrysler Material
Standard MS-6395. Use Mopar or an equivalent oil meeting the specification MS-6395.
ENGINE OIL VISCOSITY
SAE 5W-20 engine oil is recommended for all operating temperatures. This engine oil improves low temperature starting and vehicle fuel economy.
Your engine oil filler cap also shows the recommended engine oil viscosity for your vehicle. Lubricants which do not have both, the engine oil
certification mark and the correct SAE viscosity grade number should not be used.
SYNTHETIC ENGINE OILS
You may use synthetic engine oils provided the recommended oil quality requirements are met, and the recommended maintenance intervals for oil and
filter changes are followed.
MATERIALS ADDED TO ENGINE OILS
The manufacturer strongly recommends against the addition of any additives (other than leak detection dyes) to engine oil. Engine oil is an engineered
product and it's performance may be impaired by supplemental additives.
DISPOSING OF USED ENGINE OIL AND OIL FILTERS
Care should be taken in disposing of the used engine oil and oil filters from your vehicle. Used oil and oil filters, indiscriminately discarded, can present
a problem to the environment. Contact your local authorized dealer, service station, or governmental agency for advice on how and where used oil and
oil filters can be safely discarded in your area.
