Commander 4WD V6-3.7L VIN K (2007)
Intake Manifold: Service and Repair
Removal
REMOVAL
1. Perform the Fuel System Pressure Release procedure.
2. Disconnect negative cable from battery.
3. Remove resonator assembly and air inlet hose.
4. Disconnect electrical connectors for the following components:
-
Manifold Absolute Pressure (MAP) Sensor (2)
5. Disconnect vapor purge hose, brake booster hose, positive crankcase ventilation (PCV) hose.
6. Remove the generator.
7. Remove the air conditioning compressor.
8. Disconnect the ETC connector from the throttle body (3).